| [dope]FLip ScriPtz[/dope]
Join Date: Dec 2003 Location: In your airwaves
Posts: 143
Rep Power: 6  |  Mastering IN Cool EdiT w/ a LoW quaLity Mic
Orginal Posted by Nefarious
My quality isnt 100% "Mastering Methods" and what Im going to show you here, WONT make you sound EXACTLY like mine does, unless u got better or similar equipment, but we can sure try to.
Ok, Im gonna show u 5 different sets of things that SHOULD make ur vocals at this present time, sound much cleaner and crisper in a few easy steps.
Oh! One last thing, so u dont fuck up my methods or AIM me like "ughhh these didnt work, I cant find anything." There is ONLY two screens to work in on COOL EDIT 2 (which this tutorial applys to)
1. Edit Wave Form
2) Multi Track Mode.
Which One are you in? Well, if u look up in the top left of the screen, where "File" and "Edit" are, just below them should be a little block with either a SINGLE LEVEL PICTURE or one with 3 LEVELS in different TRACKS. If you see the SINGLE LEVEL PICTURE then ur in MULTI TRACK MODE, if you see the 3 LEVELS then ur in EDIT WAVE FORM MODE.
Ok. Now, time for the good shit.
Step One: The fuckin easiest step is done in MULTI TRACK mode. To the left of your screen in the first TRACK, essenstially the place MOST people INSERT their INSTRUMENTAL before they record, above where u see the words "TRACK 1" you should see 3 small BLOCKS. They say "Vol," "EQ," and "BUS." CLICK on the "EQ."
Step Two: We're now going to ANALOG (which means manually) make a preset that you can adjust once u put in my preset to your own perameters once finished. You should see a grey box that says Eq/A, V 0, Pan 0, H 0, M 0, and L 0. DOUBLE click either the H, M, or L (it doesnt matter which one).
Step Three: This shouldve brought up a box that at the top reads "Track Equalizers." If not, turn off ur computer, open ur window, and drop it out. Now, once you have reach this screen you SHOULD see a lil level diagram with THREE WHITE BALLS in it (dont make any jokes lol). Now below that Diagram, to the left, you'll see Lo, Mid, and Hi (in order from top to bottom, we hope). To the right of that should be a a GREY and RED colored sliding bar that u can adjust, but dont do it or else I'll break ur fuckin nose. Now to the RIGHT of that should be NEON GREEN numbers. Those are your preset FREQUENCIES for each set of levels (Hi, Mid, Lo).
Step Four: Now, on the Lo, Change it to 160 (mine are preset so if ur already set @ 160, congratulations). On the Mid, set it at 2500. And for the Hi, Change it to 7000, BUT DONT CLOSE THIS SCREEN YET. If you look towards the top right you should see a verticle set of sliding bars in the order from LEFT TO RIGHT that read, Lo, Mid, Hi (hey hey! the same as before). Below them once again should be NEON GREEN NUMBERS that are still set at 0. For the Lo, put it at 3.3. For the Mid, put it at -2.4. And for the Hi, Set it at 4.0. Now if u have a deep voice u might want ur Lo @ like 1.2 and ur Hi about the same, and if youre a HIGH PITCHED person like me, u wanna do the opposite and have ur Lo raised to about 3.3-3.8 just to give ur voice a lil depth. BUT DONT CLOSE THIS SCREEN YET or im gonna have Kirpatrick here punch u in the stomach.
Step Five: Ok just fucking with you, once u have all those PRESETS I gave you punched in, feel free to hit the X at the top of that little box. Now, back where u see Vol, EQ and BUS, there should be all the presets u put in just below. NOW TO INSURE WE DONT LOSE these, go ahead and RIGHT CLICK on the Eq/A. A small box should pop up that reads, EQ Presets, inside it to the bottom u should see "ADD NEW." CLICK IT. Now title this preset "NTL's Hung" or whatever you want . NOW if you ever want to use that preset again, RIGHT CLICK THE Eq/A Box, and then find ur PRESET which u titled, and click it. NOW, initially the PRESETS WONT SHOW UP. So now you LEFT CLICK on the Eq/A Box TWICE, and WALLA! Magically they appear.
Now for the EDIT WAVE FORM Methods
Inside this we're going to accomplish 4 things.
1. Setting a good Echo (not the dolphin)
2. Create a DOPE Hard Limiting Configuration
3. MAKE AN ILL Dynamics Processing Preset
4. Make an eurotic Graphic Equalizer preset
ECHO: To get there follow these Arrows. EFFECTS>DELAY EFFECTS>ECHO. Ok, now in echo there should be 3 Catagories of ECHO configuration.
1. Decay
2.Delay
3.Initial Echo Volume
Step One: On Decay to the right of the TWO SLIDING bars should be two WHITE BOXES with some random numbers in them. You're going to enter an 8 into BOTH boxes, which will be for the %...
Step Two: On Delay its the same thing, but in the TWO WHITE BOXES put 400 for the ms.
Step Three: On Initial Echo Volume to the right in the boxes put, 9, which will be for the %....
Step Four: Go to the top right where it says "ADD" and title this as whatever name u want so it can be set FOREVER as a preset.
HARD LIMITING: To get there go, EFFECTS>AMPLITUDE>HARD LIMITING. In here you'll only have to set 4 boxes. At this point in time I HOPE most of u understand how this works, cause im going to leave out some off the kiddie bullshit so I wont have to type so much.
Step One: On the right of "Limit Max Amplitude To" should be a white box. inside of it, put in -6.5 for the dB.
Step Two: On the right of "Boost Imput By" should be a white box. Inside of it, put in 1.8 for the dB.
Step Three: On the right of "Look Ahead Time" should be a white box. Inside of it, put in 7 for the ms.
Step Four: On the right of "Release Time" should be a white box. Inside of it, put in 100 for the ms.
YOU CAN NOT PRESET THIS ONE, However, no matter whether u turn ur comp off or not it will ALWAYS be there, unless u fuck with it then it will change to what u just put in. But for now, it will stay as this as long as u dont touch it again.
Dynamics Processing: To get there, go EFFECTS>AMPLITUDE>DYNAMICS PROCESSING.
This ONE is the hardest to configure of all of them, but if you're patient I will make it worth your while.
Step One: Notice at the top there is 5 tabs: Graphic, Traditional, Attack/Release, and finally BAND LIMITING. Click on the tab that reads TRADITIONAL.
Step Two: Now you will see some numbers along the side in order from top to bottom. This catagory is "Sections." The order of them is 2,3,4,5,6. CLICK THE WHITE CIRCLE ON THE RIGHT OF THE 2. Now you should see 2 FOLD DOWN TABS. In the top one set it on Compress. On the bottom one set it on Expand.
Step Three: Next to those tabs you clicked, to the right, you should see the catagory "Ratios." Just to the right of "Compress" in the white box put 1.5. Below it on the right of "Expand" put 1.1. Now there SHOULD only be ONE WHITE BOX LEFT, and it should be to the right next to the presets with a "dB" on the right of it,. Inside this white box you'll put -40.7.
Step Four: Click on the tab that reads Attack/Release. There once again is different catagories, however, only 2 of them, Gain Processor, and Level Detector. Under Gain Processor, there should be 3 sub catagories (Output Gain, Attack Time, and Release Time). Next to Output Gain in the box put 6. Next to Attack Time in the box put 1. And finally in Release Time put 500.
Step Five: Now under the catagory, "Level Detector" there is 3 sub catagories, again Input Gain, Attack Time, and Release Time. Next to Input Gain inside the box put 0. Next to Atack Time put 5. Next to Release Time put 300.
Step Six: Just below "Release Time" in the "Level Detector" Section, you should see 2 CIRCLES YOU CAN CHECK. Make sure RMS is checked, NOT PEAK.
Step Seven: Below that you'll see "Lookahead Time." You're going to put a 3 there. MAKE SURE YOU DONT CHECK "NOISE GATING" AND "CREATE ENVELOPE ONLY."
BAND LIMITING:
Step One: Click on the tab that reads, "Band Limiting"
Step Two: You'll see ONLY 2 WHITE BOXES. They're just to the right of the 2 cutoffs.
1, Low Cutoff
2. High Cutoff
For Low Cutoff put 0. For High Cutoff put 24000. Now add this as a preset.
GRAPHIC EQUALIZER: To get there go, EFFECTS>FILTERS>GRAPHIC EQUALIZER.
Step One: We can kinda cheat here. First make sure ur set on the tab at the top that reads "10 BANDS (1 OCTAVE)." Ok, now you should have a list of presets. SCROLL ALL THE WAY DOWN, and you'll see one that reads, "Vocal Pressence (BOOST)." Click that, but DONT hit OK.
Step Two: You only have to change 1 thing in here, so this is a piece of cake. You should see a BLUE DIAGRAM indicating what your levels will peak at during 'actual response.' You'll see a bunch of virtical SLIDING BARS, that have numbers above each of them. Find the one with the 2 above it. Now, JUST LEFT CLICK on the sliding piece in the middle of that bar so your computer recognizes you want to adjust just that level. Once you've done that, look just below the sliding bar ur on, and find the white box on the right of the catagory "GAIN." Inside this box put 1.99. To the left of it you should see another catagory that reads "BAND." Inside its box it should say 2000 Hz. If it doesnt, find it. DO NOT TOUCH ANY OTHER SLIDING BARS.
FINISHED! Now preset that bitch and you've got urself made.
The order I do these methods in goes as typed: Hard Limiting, Dynamic Processor, Echo, Graphic EQ.
pZ
__________________
I'm the verbal-spit Smith Wesson
I unload with sick spit the quick wick could split a split-second
Bomb with a lit wick expression
You here a tick tick then you testin.. |
users 
Linear Mode
